Iflash fan driver#

If that does not work, follow the old driver deactivation process here – ( CLICK HERE for tutorial).

Iflash fan install#

If you have a issue with the driver, or you get an error that says USB Device Not Recognized, first try to install the Device Driver here.

Windows 8 and 10 may require the need to do the driver deactivation.

Iflash fan drivers#

Each OS does install drivers differently so if you encounter a problem, please contact us.

Windows 8 and up are acceptable and there are no RAM requirements.

Iflash fan update#

Once you install the program, access your device manager and update the driver or replace it with this one here. Windows 7 requires a different driver.Because you need to connect the cable from your car to your computer, a Laptop or Tablet is required and should be plugged in while doing the process. This can be any PC and we have heard of Mac’s working if booted up as a Windows machine. Computer – You need to have a computer to install the flash client and connect the USB cable to.The software is either saved on the included memory stick in your Flash Kit or emailed to you specific for your vehicle. This is program is installed like any program on your computer as a. Flash Client – The software application that allows you to read and write via your OBDII port.It uses a mini USB to standard USB cable that plugs into your computer. Flash Cable – This is included in your VRTuned Flash Kit.These are the things you will need to read and write to your vehicles ECU through the OBDII port. Required to flash:Our VRTuned OBDII flash client is pretty simple and direct. We are always available for support and can even assist you remotely in the read/write process. If your vehicle requires the ECU to be mailed in to be flashed, you may skip these instructions. If the instructions are not followed, you could risk damage to your vehicles ECU. Make sure you view our instructional video below and follow each step as described for the read and write process.

Getting Started: Once you receive your VRTuned Flash Cable Kit, follow these simple instructions to begin your ECU flash process.

Iflash fan how to#

****If you are a previous customer and your software application has expired, please go to the Download Here section and see the notes how to proceed and redownload the latest application.**** If you are using the HP Tuners MPVI2, follow these instructions here. If you are flashing your VW/Audi DSG Transmission, follow these instructions here.įor Polaris ECU Flashing, follow these instructions here.įor Canam ECU Flashing, follow these instructions here. If you have a Alientech Powergate 3 handheld unit, follow these instructions here instead.įor BMW F-Series follow these instructions here. If you have a DimSport MyGenius handheld unit, follow these instructions here instead. If you cannot get it to work on your computer, you may want to try another computer, different version of Windows, or have someone help you configure your PC. We will gladly help to the best of our ability, however we are not Windows technicians nor work for Microsoft. Installation does require you have administrator permissions. You may also have to install the driver separately. If you have errors related to the USB Device, follow the instructions below and try to disable the driver signature. Installing this software is the same as installing any WINDOWS application. Once the cable is locked to your VIN, the cable cannot be refunded.*********** This is the responsibility of YOU, the customer. We have NO control over this or a way of knowing if your ECU has been flashed previous to your purchase. We will then fix your ECU to work with the cable and return it back to you. The only way to read out the ECU and fix this issue is in boot mode on the bench. Even if the ECU was flashed back to “stock” by these companies, the ECU still cannot be read. Some companies do things to the ECU processor that will not allow it to be read out via OBDII.

***********Attention!!! If you are NOT the first owner of your vehicle, it is possible that your vehicle could have been flashed previously. ****Also Note – Once you lock your cable to your VIN, our Terms & Conditions apply**** ***PLEASE READ THIS ENTIRE PAGE BEFORE PROCEEDING***